Nozzles for lubrication selection table

The table below summarises much of the information in the lubrication nozzle section of the SNP website. It is intended to be a handy reference guide to aid nozzle selection.  Full data on each of the nozzles listed can be accessed by clicking on the boxes in the left hand column of the table below. The data sheets will open in a separate tab to allow easy comparisons between multiple product sheets.

Nozzle Type

Nozzle Design

Flow Rates (l/min)

Available Spray Angles

Spray Pattern

Notes

Low flow rate flat fan nozzle

Elliptical orifice

0.04-27

0-110

Flat fan

Low flow rate

Deflector flat fan nozzle

Deflection

0.16-2810

105, 145

Flat fan

Wider angles

Flat fan nozzle box (NF)

Elliptical orifice

0.16-2810

0-120

Flat fan or solid stream

 

Low profile flat fan nozzle

Elliptical orifice

0.16-155

0, 30, 60

Flat fan or solid stream

Very low profile

Axial whirl

0.497-192

30,60,90,120

Full cone

Square pattern available

Axial whirl

0.424-8.3

80,120

Full cone or hollow cone

Low flow rate full cone nozzle

xa air atomising nozzles

Air atomising

0.0230-1.55

Various

Full cone

Hollow cone

Flat fan

Very low flow rates

Up to 8 metres projection

Different spray patterns available

nozzle catalogue

Lubrication Engineering Considerations

Lubrication Nozzle Designs

Share
 

Share |

BETE Blogs