unispray system

All New Catalogue
catalogue-thumb

Uni-spray quik fit couplersUni-Spray System

The Uni-Spray quick change system is a complete connector, nozzle holder and riser system for use in pre-treatment spray tunnels. All products are available in a catalogue-thumbvariety of chemically resisistant materials and so the system can be used to spray even the most aggressive alkali de-greasers, phosphating agents and acid based cleaners.

The Need for Speed

The whole system is designed to make the maintenance and cleaning of large pre-treatment tunnels as quick and easy as possible. The regular cleaning of tunnel spraying systems is essential to ensure efficient spraying and to reduce waste and product quality rejects. However, all such maintenance represents down time and so there is always a balance between regular cleaning and the pressure to meet production deadlines. As such quick change systems such as Uni-Spray’s are an essential product feature for any busy pre-treatment line.

The complete system

Please click on the relevant part of the diagram below to access more information on the individual components of the Uni-Spray System or click on the product boxes below to access the product datasheets directly.

MK 1 MK2 MK3 Q Tip Ball nozzle

Connect Riser Saddle Complete riser

Quick disconnect coupler (click for more info)
Headers. Click for more info
Moulded spray nozzles. Click for more info
Moulded spray nozzles. Click for more info Moulded spray nozzles. Click for more info Moulded spray nozzles, Click for more info
Moulded spray nozzles, Click for more info
Moulded spray nozzles click for more info
Riser supports. Click for more info
Quick lock risers. Click for more info
Mare 2 and 3 nozzle holders. Click for more info
Quick release nozzle holders. Click for more info
Moulded spray nozzles. Click for more info Moulded spray nozzles. Click for more info Moulded spray nozzles, Click for more info
Moulded spray nozzles. Click for more info
Quick change nozzle tips. Click for more info

Pretreatment nozzle selection

Notes on some general engineering factors to consider when selecting nozzles for use in pre-treatment tunnels can be found by clicking on items in the blue menu to the right hand side of this page.

Pretreatment nozzle quick change system

Each component part of the quick change system is discussed in the relevant components section accessible through the grey menu to the right or by the datasheets linked in the boxes below.

Uni-Spray System Components