WR-2 Foam/Rinse/Sanitise With SmartWand™
Lafferty airless foam/rinse/sanitiser applicator with the unique all-in-one SmartWand™
WR-2 Foam/Rinse/Sanitise System
The WR-2 Foam/Rinse/Sanitise System combines a medium volume airless foam/rinse/sanitizer applicator with the unique all-in one SmartWand™. This venturi injection system uses standard city water pressure (approximately 2.4 - 8.6 bar) to draw and blend chemical concentrate into the water stream, creating an accurately diluted solution. The foaming solution then flows through the discharge hose and the SmartWand™, which draws in atmospheric air to create and project wet, clinging foam onto any surface, whether up close or at distances up to 1.8 metres. Simply open the appropriate ball valve and rotate the SmartWand™ to use the fan pattern spray setting for applying sanitiser or rinsing at full pressure.
Key features
- Designed for foam cleaning, rinsing and sanitising medium to large sized areas where compressed air is not available
- The SmartWand™ is a unique 3-in-one device for alternating between airless foam, rinsing and sanitising
- Projects wet, clinging foam which increases chemical contact time and effectiveness
- Foaming expands the chemical and reduces over-application by providing visual assurance of coverage
- Chemical resistant components ensure years of outstanding performance with minimal maintenance
- Use it where 2.4 - 8.6 bar water is available
- Water pressure gauge eliminates guessing, reduces set-up time, and helps with troubleshooting
- Available with a stainless steel cart (#975297)
Requirements
- Chemical ConcentrateWaterTemperature: up to 71°CPressure: 2.4 - 8.6 barFlow: 15.1 L/min @ 2.8 barHoseFoam: 1/2" ID x 50'/ 15.2mRinse: 1/2" ID x 50'Sanitise: 1/2" ID x 50'NozzleFoam: SmartWandRinse: SmartWand
Sanitise: SmartWand
Dilution Ratio Range @ 2.8 bar
