Spray Nozzle

HPSS Foamer

Lafferty high pressure foam applicator for washdown

HPSS high pressure foam applicator

HPSS high pressure foam applicator

The HPSS Foamer is a 7.5 L/min @ 48.3 bar foam applicator for projecting foaming chemicals on to any surface up close or at a distance. This stainless steel venturi injection system uses high water pressure (27.6-68.9 bar) to draw and blend chemical concentrate into the water stream to create an accurately diluted solution. Rich, clinging foam is created by injecting compressed air into the solution to greatly increase volume and coverage ability. The foam is then projected through the discharge hose and fan nozzle at distances up to 4 metres.

HPSS Foamer version without hose also available: #918115

 

Data sheet Data sheet

Key features

    • Stainless steel foamer body for durability and maximumchemical resistance
    • Projects rich, clinging foam which increases chemicalcontact time and effectiveness
    • Foaming expands the chemical and reduces over-application by providing visual assurance of coverage
    • Fan pattern nozzle for quick coverage (up to 14 m)
    • Covers up to 46.5 sq m in 2 minutes
    • Optional zero degree nozzle for increased foam throw
    • Adjustable foam consistency (wet/dry)
    • Chemical resistant wetted components ensure years ofoutstanding performance with minimal maintenance
    • Available with a polypropylene foamer body (#918105)
    • Available with a higher flow rate (#917115)

Requirements

    • Chemical Concentrate

      Water

      • Temperature: Up to 82.2°C
      • Pressure: 27.6-68.9 bar
      • Flow: 7.57 L/min at 48.3 bar
      • Supply Line: 3/4"

      Compressed Air: Up to 5 CFM / 8.45 Nm³/h
      Hose: 1/2" ID x 15.2 m
      Nozzle: 50250
      Dilution Ratio Range: 454:1 to 6:1 @ 48.3 bar