Timed Entryway HV Foam Sanitizer
Entry way HV foam sanitisation
Time Entryway HV Foam Sanitizer
The Timed Entryway HV Foam Sanitizer is an automated foam applicator for projecting sanitising chemicals on to floors of 2.4–4.9 m wide overhead doors to prevent cross contamination. When activated, this venturi injection system uses city water pressure 2.41–8.6 bar) to draw and blend chemical concentrate into the water stream to create an accurately diluted solution. A high volume of rich, clinging foam is created by injecting compressed air into the solution to greatly increase volume and coverage ability. The foam is then projected through the discharge hose and unique Spreader™ nozzles. The system timer is user-programmable to meet the needs of any facility.
Key features
- Applies a layer of rich, clinging foam to entryway floors to prevent cross-contamination
- Designed for 2.4–4.9 m wide overhead doors
- Dilutes chemical concentrate "on-the-fly" from a container near the unit
- The unique Spreader™ nozzles lay a foam pattern 2.4–4.9 m across and up to 3 m wide to ensure that all foot traffic and cart wheels are fully exposed to the sanitiser
- Automatic activation and shutoff for use in moderate to high traffic areas
- Adjustable timer controls the application of foam at regular intervals - up to 1 minute foaming and up to 1 hour off Adjustable foam consistency (wet/dry)
- Chemical resistant wetted components ensure durability and years of reliable service with minimal maintenance
- Available for smaller doors (#976500, 976530)
- Available for 24VAC electric (#976560-24V)
- Get in touch for other configurations
Requirements
Chemical Concentrate
- Water
- Temperature: Up to 71.1°C
- Pressure: 2.4–8.6 bar
- Flow: 15.1 L/min @ 2.8 bar
- Supply Line: 3/4" Min
- Compressed Air: Up to 5 CFM / 8.5 Nm³/h
- Hose/Pipe: 1" & 3/4" ID
- Nozzle: HV Entryway Spreader (2 - use both)
- Electric: 120V
- Dilution Ratio Range: 914:1 to 6:1 @ 2.8 bar
- Water
