Cleaning & washdown systems
Industrial and food factory cleaning equipment
The equipment in this section is used for the mixing and delivery of liquid cleaning chemicals and water in industrial facilities such as food processing premises where the removal of contaminants such as greases, fats, proteins and other residues is essential. Cleaning is distinct from disinfecting or sanitising and must take place before any disinfecting operations.
We supply a large range of innovative products from US company Lafferty Equipment who have been specialising in manufacturing foamers, sprayers, foggers and dilution control systems for more than 35 years. The company's products are designed for demanding applications in the food processing, bottling, car/truck washing, agricultural and industrial sectors.
The range of cleaning and washdown systems includes mixing stations, mobile and fixed spraying equipment and conveyor cleaning solutions and includes compressed air assisted systems. We also supply a range of hand and foot-operated hand sanitising equipment.
Please click on the boxes below to find out more about the solutions we offer.
Wall-mounted sprayers and spray guns
The following units allow for mixing water and cleaning chemicals either at a wall mounted station or at a gun (compact sprayer). These just need a water supply to work and operate at a wide variety of flow rates.
Information on our different sprayer options can be found by clicking on the product boxes below.
Washdown mixing stations
Mixing stations deliver accurate and reliable mixes of chemical concentrates and mains water. They require no power and no pumps, meaning they are easy to install and simple to use.
Click on the product boxes below for datasheets.
Air-powered mobile cleaning stations
These units are powered by compressed air and come in a range of sizes to suit cleaning of any small-medium sized area. There are two options: the pressure pot system distributes pre-diluted liquids while the air-pump system provides integrated mixing.
See box below for more information.
These units can be mounted on a portable trolley or on a wall and use venturi action to mix concentrate to deliver a spray to conveyors. They have adjustable arms and nozzles to ensure coverage of variable width conveyors. The Conveyor-Mate™ 315 sanitiser system is specialised for clean-in-place spray sanitising onto conveyor belts and can also
be used as a manual sanitiser. The stainless steel spray arm and nozzle assembly can be permanently or temporarily mounted to
the conveyor belt housing or nearby surface. The fully adjustable spray arm extends vertically and horizontally to virtually any
position. The unique stainless steel Spreader Nozzle™ creates a wide spray pattern that can be adjusted and rotated to ensure
optimal coverage at any angle. The included 315 sanitiser is a venturi dilution system that uses mains water pressure (35 - 125
PSI) to accurately draw and blend chemical concentrate into the water stream. The solution is then projected through the
discharge hose to the spray arm. Quick disconnect the spray arm and attach a wand for manual sanitising. Ideal for food factory conveyor cleaning & washdown.
Click below for full information.
For areas which may be hard to reach with more conventional washdown systems, backpack and compression sprayers can be used to spray detergents and disinfectants. They require no power and produce a low impact, wet spray.
Click below for more details.
High impact fan nozzles produce a coarse medium-high impact spray. A wide range of flow rates are available making them an excellent choice for many conveyor based cleaning systems. Standard flat fan nozzles are used extensively in cleaning applications. They are ideal for conveyor-based wash, rinse and cleaning systems and are available in a wide range of spray angles and flow rates as well as in a variety of materials.
For more information about cleaning nozzles, visit our flat fan nozzle page here.
For more information, click the box below.