Pollution Control Industry Nozzle Selection Table

The table below summarizes much of the information in the paper and pulp industry section of the BETE Limited website. It is intended to be handy reference guide to aid nozzle selection. Full data on each of the nozzles listed can be accessed by clicking on the boxes in the left hand column of the table below. The data sheets will open in a separate tab to allow easy comparisons between multiple product sheets

Nozzle Type

Application Type

Example

Notes

Spiral air, 3 stage air atomising high flow rate nozzle

Gas Scrubbing

Removal of contaminants from fast flowing gas pipe

Very fine spray ensures swift reaction time.

Spiral Hollow Cone Nozzles

Foam Control

Knocking back foam in water treatment plant

Large area needs to be sprayed with reasonable impact

P series misting nozzle

Dust Suppression

Suppressing coal dust in coal unloading area

xa air atomising nozzles

Odour Control

Removal of odour from land fill site

Large area spraying in open environment means fine spray requires some momentum

P series misting nozzle

Odour Control

Removal of odour from food processing plant

Fine spray

Spiral Hollow Cone Nozzles

Gas Scrubbing

Removal of contaminants from gas emissions

Large area needs to be scrubbing e.g. emissions from power stations

 Abrasion resistent, large free passage, spiral nozzle  Gas Scrubbing Removal of contaminants from gas emissions Large area needs to be scrubbing.
Abrasion resistant nozzle.
Large free passage.

Pollution Control Key Spray Applications

Pollution Control Key Spray Challenges